Gain in Productivity

ELLOR® GRAPHITE = GAIN IN PRODUCTIVITY

  • Using ELLOR® graphite means time savings, up to 40% in roughing mode.
  • With same current density, metal removal turns from 600 mm3 /min with copper to 1,200 mm3 / min with ELLOR® graphite.
  • The stability of ELLOR® graphite grades permits the machining of thin ribs.

Grade Machinability

 The index describes how difficult it is to machine the electrode. ELLOR®+25 equals 100 as a reference.

Machinery Recommendations

Tools

Micro-grain tungsten carbide, diamond,…